ITEM # PART # DESCRIPTION RETAIL BUY NOW
1 A10000WT HANDLE ASSY. (Bright White, Bracket included) - Aquabot Turbo T (version 2006) $103.88


Qty:

2 S1100WT HANDLE BRACKET (Bright White) - Aquabot Turbo T (version 2006) $34.85


Qty:

8 1105 SCREW (10-32, 7/8", Phil Pan Head) - Use to fasten the Handle Bracket to the Body Assembly $1.27


Qty:

9 2701 SCREW (#8, 11/16", Phil Pan Head) - Use to fasten Pump Motor $1.27


Qty:

12 2109 P-CLIP (Blue, Coated Steel) - Use to fasten the Cable to the Handle of the Aquabot Turbo T, T2, T4 $2.44


Qty:

13 2700 SCREWS (#8, 11/16", Phil Pan-Flat Head) - Use to fasten P-Clips, Sideplates, and Drive Motors $1.27


Qty:

14 2260 SCREWS (#6, 7/16", Phil Pan-Flat Head) - Use for P-Clips, Outlet Top, and H-Float $1.27


Qty:

15 1601 PLUG (3-Pin, Female, 2-Wire) - Aquabot Turbo T (version 2006) $14.63


Qty:

16 S7930 EZ-SWIVEL (For 2-wire Cable) - Can be used on any 2-wire Cable Assembly $46.62


Qty:

17 A16261T CABLE ASSY. (2-Wire, 60 Foot, Floating) - Aquabot Turbo T (version 2006) $281.75


Qty:

2250WT OUTLET RING (Bright White, Ring only, does not include Top dome) $9.12


Qty:

25 2230WT-1 OUTLET TOP (Bright White, Top dome only, does not include bottom Ring) $21.18


Qty:

26 A2005BL1 BODY ASSY. (Blue, with Lock Tabs, Pin, Outlet Ring, Inserts) - Aquabot Turbo T (version 2006) $138.65


Qty:

36 SP9204W LOCK-TABS (White, Plastic) - For All Body Assemblies, used to hold Bottom Lids to base of cleaners $3.60


Qty:

38 2303 SCREWS (18-8, 8/32" x 1/2", Phil Bev Head) - Use to fasten the Lock-Tabs to the Body Assembly $1.27


Qty:

39 7133 LOCK-NUT (Nylon Insert, Hex) - Use to fasten the Screws of the Lock-Tabs $0.83


Qty:

40 1628 GROMMET (Rubber) - Use around Cable Assembly on Body $2.44


Qty:

45 3400WT SIDEPLATE (Bright White, no holes) - Aquabot Turbo T (version 2006) $27.88


Qty:

51 2600 BUSHING (White, Plastic) - Aquabot Turbo T (version 2006) $18.00


Qty:

52 2610 BUSHING (White, Plastic, Use for Pin on Body Assembly) - Aquabot Turbo T (version 2006) $18.00


Qty:

55 3700 LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body Assembly Pin Support $3.60


Qty:

56 3506 STEPPED SLEEVE ROLLER (White, Thicker end supports Drive Belts, Install on upper Sideplate legs) $2.76


Qty:

57 SP3302 DRIVE BELTS (Tan) $17.38


Qty:

58 A3605 PULLEY ASSEMBLY (~ 2.75 inches long) $33.81


Qty:

3607 WASHER (Use on Pulley Assembly, Rounded edges facing inward) $5.83


Qty:

3397WT NOZZLE BRACKET (White, Supports Drive Track, holds Nozzle in place) $5.83


Qty:

3398WT NOZZLE (White, Snaps into Nozzle Bracket, connects to Poly Tubing for power washing under cleaner) $5.83


Qty:

60 A6005-03 PUMP MOTOR (Aquabot Turbo T) (version 2006) $213.79


Qty:

61 4402 PROPELLER - Aquabot Turbo T (version 2006) $12.25


Qty:

63 6027 IMPELLER (Red) - Aquabot Turbo T (version 2006) $12.25


Qty:

64 6028 IMPELLER HOUSING (Red) - Aquabot Turbo T (version 2006) $12.25


Qty:

65 300096 TUBING (Clear PVC, 5/16"ID x 1/2"OD) - Use to divert water from the Impeller to the Nozzle Bracket $1.10


Qty:

80 A8545 DRIVE MOTOR (Blue, bare wire leads) - Aquabot Turbo T (version 2006) $320.85


Qty:

3101 FLOAT (Place under Drive Motor) $1.67


Qty:

86 SP5474 SHRINKABLE BUTT CONNECTORS (Light Blue, crimp closed and heat shrink to seal) $2.54


Qty:

87 SP1617 SHRINK TUBE (5/16", Blue) - For sealing 2-wire connections, use under Heat Shrink 1619 $46.64


Qty:

87 SP1619 SHRINK TUBE (1/2", Black) - For sealing 2-wire connections, use over Heat Shrink 1617 $46.64


Qty:

88 1625 SHRINK TUBE (3/4", Black) - For sealing all medium sized connections at the Junction Box $46.64


Qty:

90 A38205MG WHEEL TUBE ASSY. (Aquabot Turbo T) (version 2006) $69.94


Qty:

91 11058 RETAINING RING (E-Clip) - Aquabot Turbo T (version 2006) $3.67


Qty:

92 3603 WASHER (Nylon, Flat) - Aquabot Turbo T (version 2006) $1.27


Qty:

97 SP3016BL SUPER EZ-BRUSHES (Blue, Short) - Aquabot Turbo T (version 2006) $77.89


Qty:

99 3203 DRIVE TRACK with TRACTION TABS (Blue) $22.24


Qty:

101 8100 FILTER BAG (Fine, for small debris) $48.97


Qty:

101 8200 FILTER BAG (Mesh, for large debris) $46.75


Qty:

103 A5080 FILTER SCREEN (Blue, Rounded cage) - Aquabot Turbo T, T2, T4 (version 2006) $27.88


Qty:

103 SP5310 FILTER SCREEN (NEW, Blue, Folding Cage with Attachment Strings) - Aquabot Turbo T, T2, T4 (ver 2006) $27.88


Qty:

105 A9200XWB BOTTOM LID ASSY. (Blue, W-shaped Wire Frame) - Aquabot Turbo T (version 2006) $92.11


Qty:

106 9305BL INTAKE VALVE FLAP (Blue Plastic) - Aquabot Turbo T (version 2006) $4.60


Qty:

108 S3103 H-FLOAT (Foam, Plastic, with Screws) - Fasten to Bottom Lid if cleaner's wall-climbing is not high enough $11.64


Qty:

110 7098D POWER SUPPLY (3-Prong, Male Socket, 7hr External Digital Timer) - Aquabot Turbo T, T2 (version 2006) $198.56


Qty:

111 7108 SOCKET ASSY. (3-Pin, Male, 2-Wire) - Aquabot Turbo T (version 2006) $10.49


Qty:

112 7206 FUSE HOLDER (MINI, Phillips Head style) - Aquabot Turbo T (version 2006) $8.14


Qty:

7207 FUSE (2.5 Amp, MINI, 250 Volt, Slow- Blow) - Aquabot Turbo T (version 2006) $3.07


Qty:

114 7208 ON / OFF SWITCH (Thin, Red, 3-Wire) - Use for Power Supply with Dial or Digital Timer $8.16


Qty:

117 7041A HANDLE (Plastic, with Hardware)  $6.23


Qty:

118 7102 CORD FOR POWER SUPPLY (3-Wire, Green, Black, and White) $11.66


Qty:

119 7074D DIGITAL TIMER (NEW, Front Digital display, 1-7 hours Adjustable) - Aquabot Turbo T4 (version 2006) $52.47


Qty:

800070 NOVUS 2 Plastic Polish 24 oz. Bottle - Polish for the plastic components $80.56


Qty:

1609 TIE (Blue, #4, Plastic, reusable) - Use for coiling the Cable Assembly among other things $1.27


Qty:

A800135 MAIN DRAIN BUMPER - Can be used on most Pools' Main Drain, where a cleaner may get stuck $40.28


Qty: